Morel HYBRID MW4mkII
4" Hybrid woofers with neodymium/ferrite EVC motor and 2.1" voice coil, 4 ohm. Sold in pairs.
Specifications
| Model | HYBRID MW4 MKII |
|---|---|
| Nominal Impendance (ohm) | 4 |
| Power Handling Wrms | 100 |
| Max. Trans. Pwr Handling Wrms | 300 |
| Sensitivity (2.83 V/1M) dB | 89 |
| Frequency response Hz | 50-4200 |
| Resonant Freq. Fs Hz | 82 |
| Voice Coil Diameter mm (inch) | 54 (2.1) |
| Voice Coil Height mm (inch) | 10.50 (0.41) |
| Voice Coil Type/Former | Aluminium |
| Voice Coil Wire | Hexatech™ Aluminium |
| DC Resistance (ohm) | 3.2 |
| Voice Coil Induct. @1 kHz (mH) | 0.21 |
| Magnet System | Hybrid rear vented |
| HE-Magnetic Gap Height mm (inch) | 4 (0.16) |
| B-Flux Density (T) | 0.83 |
| BL Product/BXL | 4.16 |
| Max. Linear Ex./Xmax mm (inch) | 7 ± 3.5mm (0.28 ± 0.14) |
| Suspension Compliance CMS - mm/N | 0.57 |
| Electrical Q Factor QES | 0.63 |
| QTS | 0.46 |
| QMS | 1.74 |
| Mech. Resistance RMS- N . S / M | 1.98 |
| Moving Mass MMS - gr/ounce | 6.8 |
| Equiv. Can Air Load VAS - L (cu.ft3) | 3.17 (0.11) |
| Effective Piston Area SD sq.cm (sq.inch) | 64 (9.92) |
| Cone Type | One-piece formed |
| Cone Material | DPC |
| Unit Diameter mm(inch) | 109 (4.3) |
| Mounting Depth mm (inch) | 28.5 (1.12) |
| Mounting Cutout | 93 (3.6) |
| Net Wight Kg (lb) | 0.53 (1.1716) |
Installed by Audio Edge
We sell every product as part of a system designed for your vehicle — consultation, installation, and tuning included. Tell us what you drive and we’ll tell you what this can do in your car.
Proof
Used in these builds
Let’s talk about your car
Tell us what you drive and what you want it to sound like. We’ll come back with a plan — gear, fabrication, timeline, and a real number.