HELIX IK W6 DVC2
165 mm (6") component subwoofer, dual 2 Ω voice coils, 300 W.
Specifications
IK W6-DVC2 – 2 x 2 Ohms
| Power handling RMS / Max. (P) | 150 / 300 Watt |
|---|---|
| Impedance (Z) | 2 x 2 Ω |
| DC resistance (Re) | 2 x 2.0 Ω |
| Resonance frequency (Fs) | 50 Hz |
| Mechanical Q factor (Qms) | 3.92 |
| Electrical Q factor (Qes) | 0.32 |
| Total Q factor (Qts) | 0.30 |
| Compliance (Cms) | 261 μm/N |
| Equivalent air volume (Vas) | 5.3 L |
| Force factor (B*I) | 12.3 Tm |
| Sensitivity (SPL) | 89.0 dB @ 2.83V / 1m 86.0 dB @ 1W / 1m |
| Cone area (Sd) | 123 cm² |
| Moving mass (Mms) | 37 g |
| Cone material | Hand-scooped paper cone |
| Mechanical resistance (Rms) | 3.04 kg/s |
| Voice coil diameter (ø) | 37 mm |
| Voice coil winding height | 18 mm |
| Max. linear excursion (Xmax) | +/- 6.0 mm |
| Outer diameter (ø) | 164.2 mm / 6.46" |
| Installation diameter (ø) | 132.5 mm / 5.22" |
| Installation depth | 74.3 mm / 2.93" |
Recommended enclosure
Vented box
| Net volume | 7 L |
|---|---|
| Port diameter (ø) | 50 mm |
| Port area | 20 cm² |
| Port length | 34 cm (angled port) |
| Port tuning frequency (Fb) | 45 Hz |
| Lower limiting frequency (-3dB) | 43 Hz |
| Recommended DSP settings | Recommended "self-define" highpass filter with 45 Hz cut-off frequency and Q = 1.2; additional EQ filter 80 Hz / Q = 1.0 / +1.0 dB |
Installed by Audio Edge
We sell every product as part of a system designed for your vehicle — consultation, installation, and tuning included. Tell us what you drive and we’ll tell you what this can do in your car.
Proof
Used in these builds
Let’s talk about your car
Tell us what you drive and what you want it to sound like. We’ll come back with a plan — gear, fabrication, timeline, and a real number.