HELIX IK W10 DVC2
250 mm (10") component subwoofer, dual 2 Ω voice coils, 300 W.
Specifications
IK W10-DVC2 – 2 x 2 Ohms
| Power handling RMS / max. (P) | 300 / 600 Watts |
|---|---|
| Impedance (Z) | 2 x 2 Ω |
| DC resistance (Re) | 2 x 1.6 Ω |
| Resonance frequency (Fs) | 36 Hz |
| Mechanical Q factor (Qms) | 4.50 |
| Electrical Q factor (Qes) | 0.43 |
| Total Q factor (Qts) | 0.39 |
| Compliance (Cms) | 218 μm/N |
| Equivalent air volume (Vas) | 34 L |
| Force factor (B*I) | 12.3 Tm |
| Sensitivity (SPL) | 91.0 dB @ 2.83V / 1m 88.0 dB @ 1W / 1m |
| Cone area (Sd) | 333 cm² |
| Moving mass (Mms) | 91 g |
| Cone material | Hand-scooped paper cone |
| Mechanical resistance (Rms) | 4.56 kg/s |
| Voice coil diameter (ø) | 50.8 mm |
| Voice coil winding height | 24 mm |
| Max. linear excursion (Xmax) | +/- 8.0 mm |
| Outer diameter (ø) | 262 mm / 10.31" |
| Installation diameter (ø) | 232 mm / 9.13" |
| Installation depth | 126 mm / 4.96" |
Recommended enclosure volumes
Sealed box
| Net volume | 12 L |
|---|---|
| Lower limiting frequency (-3dB) | 53 Hz |
| Recommended DSP settings | “Self-Define” Highpass: 45 Hz / Q = 1.5; EQ Filter: 120 Hz / Q = 1.0 / -3 dB |
Vented box
| Net volume | 19 L |
|---|---|
| Port diameter (ø) | 70 mm / 2.76" |
| Port area | 38 cm² |
| Port length | 22 cm / 8.66" |
| Port tuning frequency (Fb) | 43 Hz |
| Lower limiting frequency (-3dB) | 43 Hz |
| Recommended DSP settings | “Self-Define” Highpass: 37 Hz / Q = 1.5; EQ Filter: 115 Hz / Q = 0.7 / -2 dB |
Installed by Audio Edge
We sell every product as part of a system designed for your vehicle — consultation, installation, and tuning included. Tell us what you drive and we’ll tell you what this can do in your car.
Proof
Used in these builds
Let’s talk about your car
Tell us what you drive and what you want it to sound like. We’ll come back with a plan — gear, fabrication, timeline, and a real number.