HELIX 201 Direct
Mono amplifier for DSP systems — 1 x 750 W (1 Ω).
Specifications
| Power RMS ≤ 1% THD+N @ 14.4 V | |
|---|---|
| - @ 4 Ohms | 1 x 250 Watts |
| - @ 2 Ohms | 1 x 450 Watts |
| - @ 1 Ohm | 1 x 750 Watts* |
| - bridged @ 4 Ohms | - |
| - bridged @ 2 Ohms | - |
| Max. output power per channel | Up to 850 Watts RMS @ 1 Ohm |
| Amplifier technology | Class D |
| Inputs | 2 x RCA / Cinch 1 x Remote In |
| Input sensitivity | 0.5 - 8 Volts |
| Input impedance | 8 kOhms |
| Outputs | 1 x Speaker output |
| Output voltage RCA / Cinch | - |
| Signal converter for digital input | - |
| Frequency response | 10 Hz - 450 Hz |
| Bass boost | - |
| Highpass | - |
| Lowpass | - |
| Bandpass | - |
| Subsonic | - |
| Phase | - |
| Slope high- / lowpass | - |
| Slope subsonic | |
| Slope subsonic / lowpass | - |
| Signal-to-noise ratio (A-weighted) | 114 dB @ full power |
| Distortion (THD @ 1 kHz, 1 W into 4 Ohms) | - |
| Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms) | - |
| Distortion (THD @ 100 Hz, 1 W into 4 Ohms) | < 0.003% |
| Distortion (THD+N @ 100 Hz, 1 W into 4 Ohms) | < 0.02 % |
| Damping factor | 200 |
| Operating voltage | 10.5 - 16 Volts (max. 5 sec. down to 6 Volts) |
| Idle current | 1,100 mA |
| Fuse | 2 x 30 A LP-Mini-fuse (APS) |
| Power rating | DC 12 V ⎓ 80 A max. |
| Operating temperature range | -40 °C to +70 °C |
| Additional features | Start-Stop capability, Clipping LED, DirectDSP inputs |
| Dimensions (H x W x D) | 41.5 x 248 x 118 mm / 1.63 x 9.76 x 4.65” |
Installed by Audio Edge
We sell every product as part of a system designed for your vehicle — consultation, installation, and tuning included. Tell us what you drive and we’ll tell you what this can do in your car.
Proof
Used in these builds
Let’s talk about your car
Tell us what you drive and what you want it to sound like. We’ll come back with a plan — gear, fabrication, timeline, and a real number.